Welcome

Sunday, December 3, 2017

Dry Ice Blasting

Dear Readers,

Wish You a Happy Winter, During winter let us discuss about surface cleaning with dry ice!
 
This new development is quickly expanding around the world. One system uses small rice pellets of dry ice shooting them out of the jet nozzle with compressed air.
Dry ice blasting is known by several names like dry ice cleaning, CO2 blasting and dry ice dusting. It is a kind of carbon di oxide cleaning, where dry ice in the solid form of carbon di oxide, is accelerated in a pressurised stream and directed in the surface in order to clean it. This method is similar to other forms of abrasive blasting such as sandblasting, or soda blasting substituted for dry ice as a blasting medium.
This method is superior to sandblasting because the dry ice is soft enough not to pit or damage the underlying surface. Since the dry ice evaporates completely as a gas it leaves no wastes. Only the material being removed must be disposed of.
Dry ice blasting is the superior alternative to sand blasting, short blasting, soda blasting, water blasting and hand cleaning.
Advantages of dry ice blasting:
·         No preparation required prior to cleaning
 
·         No need to dismantle machines for cleaning. The pellets easily reach into the smallest nooks and corners.

·         Minimal machine downtimes

·         Environmentally friendly cleaning

·         Without additional chemicals or spray agents

·         Surface are not damaged

·         No residues
Drawbacks:

1.   The loud noise produced requires protective ear equipment and may cause irritation to other people nearby. Although new machines are much quitter.

2.   Effective can only occur in a straight line of sight from the dry ice jet nozzle. Sometimes parts can be dissembled to help.

3.   Large amount of carbon di oxide are released which can be harmful if not ventilated out of space.

For More Details about Sand Blasting Click Here
For More Details about Surface preparation for Steel Click Here 

2 comments:

العاب تلبيس بنات وميكياج said...
This comment has been removed by the author.
John Oneal said...

Avast Customer Service
Norton Customer Service
Bitdefender Phone Number
Malwarebytes Phone Number
McAfee Customer Service Number

Post a Comment

Related Posts Plugin for WordPress, Blogger...

Labels

Abbreviations (27) ABW (1) AC (2) Acre (2) Admixture (3) Alloy Steel (1) Analysis (1) ANSI (1) Anti friction bearing (2) Apothecaries Mass (1) Arc welding (1) Avoirdupois Mass (1) AWG (4) AWS (4) BCR 295 (2) Beam (22) Bearings (5) Blasting & Painting (8) Blogoversary (4) Bolt (8) CAR A/C (1) Cartoon (2) Cement (1) Cent (2) CHANNEL (8) Chequered Plate (1) Chinese (4) Civil (7) Classification (3) Cleaning (4) Cold Rolled Steel (2) Colour Code (1) Column Section (1) Computer (1) Concrete (4) Construction Industry (11) Conversion Table (4) Cooking (1) Crane Rail (2) Cylinders (1) Density (1) DFT (2) Drill bit (1) Drill gauge (1) Drilling (1) Dry Ice (1) EHS (1) Electrical (1) Electrode (1) Ellipcon Steel (1) Elliptical Hollow Section (1) EN 10083-3 (1) EN 10219 (1) Engineer Day (7) Engineering Miracle (2) Environment (1) Equipment (2) ESI (1) European Steel (3) Factory Act (1) fasteners (1) Fibre Rope (4) Fire (1) FLAT (3) floating crane (1) Flood (1) Foil (1) Formula (1) FRP (2) GAUGE (9) General (32) Greetings (9) H-beam (4) Handrail (1) Heavy Weight Beam (1) HeliArc (1) Helmet (2) HEXAGOAN (2) Hollow Rectangle (3) Hollow Square (5) Hollow Steel (10) Hot rolled Steel (30) HR & IR (2) HSFG (1) HSS (9) HT BOLT (1) I-Beam (4) Information (8) Informations (4) Introduce (4) IP (1) IPE (3) IS 1173 (5) IS 1363 (2) IS 1786 (1) IS 3443 (2) IS 4923 (2) IS 808 (15) IS:1732 (1) ISA (2) ISCR (1) ISHB (3) ISJB (4) ISJC (2) ISLB (3) ISLC (2) ISMB (4) ISMC (2) ISMCP (1) ISNT (2) ISSC (2) ISWB (3) JIS G3466 (1) Joints (1) Junior Beam (2) Junior Channel (3) Labour Law (5) Labour Welfare (3) Lamination (1) Land Measurement (2) Light Beam (2) Light Channel (3) LPG Cylinder (1) Man Day (1) Man Hour (1) Man Month (1) Mass (3) Measurement (3) mechanical (1) Metals (7) Mile Stone (2) Music Wire (4) MWG (6) Non-Metal (2) Numbers (3) OCTOGAN (1) Oil (1) Painting (6) Parallel Flange Channel (2) PFC (2) PIPE (4) Piping (4) Planning (2) Plastics (2) Plates (1) Pole (1) PPE (1) Precautions (3) Protection (1) Rain (1) Rebar (1) Reconciliation (2) Reinforcement Rod (1) Reinforcemnt Steel (1) Reo (1) Rigging (9) River on River (1) Rope (7) ROUND (2) RSJ (1) Safety (14) Scale (1) Self Explanatory (5) SEP (5) Serrated Flat (1) Sheet (3) Short cut key (1) Sling (1) Slit Tee (1) Specific Gravity (4) Spoon (1) SQUARE (2) SSPC (1) Steel (21) Steel Beam (7) Steel Section (6) Steel Section Type (5) Stick welding (1) Structural Steel (58) Surface Preparation (8) SWG (5) SWL (1) Technical (9) Tee Section (5) Thanks (7) TIG (1) TIG Welding (1) Tips (2) Tools & Tackles (2) Torque (6) Troy Mass (1) TUBE (2) Turnbuckle (1) UB (2) UC (2) Unit of Mass (1) UNIT WEIGHT (57) Universal Beam (1) universal Column (2) Useful Tips (2) Valve (1) Water (4) Weather (1) Weight (14) Welding (12) Wide Flange Beam (2) Wind (7) Wind Speed (4) Wire Rope (3) Wishes (19) WWD (1)

Contact Form

Name

Email *

Message *

Note

1) I have extracted the information from reference sources which may not be in accordance with the latest Standards - as identified.

2) The data’s are based on a review of various reference sources. For important work please check against quality information sources.

3) The Articles are no way connected to company of author belongs.

4) This Blog will not be liable for any, direct or indirect, consequential or incidental damages or loss arising out of the use of this information.

5) If you have any suggestions or feedback on how this blog can improve it for you, please feel free to e-mail me (engineerdiary@gmail.com) Self will try my best to keep up with it!

6) Paypal account of this site is engineerdiary@gmail.com

7) If your brand/company is keen to work with Engineer Diary for advertisement and sponsorship, you can drop us an email at engineerdiary@gmail.com

8) For More Disclaimer please refer Disclaimer Page