Bearing design characteristic

Dear Readers,

Basic design characteristic of bearings are as Follows.

1) Deep groove ball bearings (Grooves in both Inner & Outer Rings) :

It Carries
    Radial Load
    Axial Load
    Radial & Axial load simultaneous 

2) Self-Aligning ball bearings (Spherical bearings) :

It Carries
    Radial load
    Self aligning ball bearings have particularly low friction
   Self aligning ball bearings permit minor angular misalignment of the shaft relative to the housing

3).  Angular Contact Ball Bearing ( The load is carried over from one ring to the other at an angle) :
It Carries

    Radial Load
    Radial & Axial load simultaneous
    Suitable for high speeds

4) Cylindrical Roller Bearing :
It Carries

    Radial Load
    Suitable for Heavy Radial Loads and High Speeds

5) Spherical Roller Bearing (Can to some extent compensate misalignment between shaft & Housing) :

It Carries
    Radial Load
    Axial Load
    Radial & Axial load simultaneous
    Suitable for high speeds and high loads

6) Tapper Roller Bearing :

It Carries
    Radial Load
    Radial & Axial
    Axial Load Reverse

7) Needle Roller Bearing :

It Carries
    Radial Load

For More Details about Bearings Click BRG

For More Details about Bearing Designations Click BRG-Desg
For More Details about Bearing Identification Click BRG-IDTY
For More Details about Bearing Codes, Suffix & Prefix Click BRG-Code 

Best Quote: Never be afraid to take decision. Have a Nice Day