Welcome

Showing posts with label General. Show all posts
Showing posts with label General. Show all posts

Thursday, May 1, 2025

Know Your GST Identification

Dear Readers,

Wish You a Happy May Day - 2025

The GST number, known as GSTIN, stands for Goods and Services Tax Identification Number. GST is a comprehensive indirect tax on Goods and Services in India. It is a 15-digit tax identification number issued by the government of India to registered taxpayers. Any individual, company, or partnership firm registering under GST is assigned this identification number.

GSTIN consists of 15 digits. These are 15 alphanumeric characters, each has a specific purpose. First 2 digits represent the state of registration. Next 10 characters represent the PAN number of the GSTIN holder. Next is a digit which shows the number of registration against a single PAN number in a state. Next is Z which is common for all. In the end it's either an alphabet or a number which is a check digit.


First 2 digits : State Code of India

3-12 alphanumeric characters : PAN of Person / Company/ Service 

13 digit : Number of registrations in a single state

14 alphabate : Z, common for all

15 alphabet or number: Check sum digit.

State Codes.

To Know more about PAN Card click Here



Thursday, March 6, 2025

15th Blogoversary

Dear Readers,

I am very happy and proud because Engineer Diary blog has completed its 15th year and is entering its 16th year in March. I have initiated this blog to impart the knowledge and benefits acquired from my experience to the next generation.


I am proud to state that I have been writing consistently for over 15 years, and I am pleased that this blog focuses exclusively on engineering. However, from this year onward, I would like to post about wealth creation. This change of mind is due to the evolving lifestyle of young professional engineers. During my service, I observed that most of the youngsters are taking loans instead of focusing on wealth creation. Hard-earned money should not be spent meaninglessly. They are often unaware of the difference between assets and liabilities.

I am delighted to announce that this blog has surpassed one million page views (10,494,020) and has gained 159 followers. I extend my heartfelt gratitude to everyone who contributed to this achievement and hope for your continued support in the future.

For your kind information, this blog will as always with a minimum of one post per month and a maximum of 25 posts per year. I kindly request you to supporting my blog and to refer it to others who may benefit from it. 

Once again, I thank you all…….

Wednesday, May 1, 2024

Gratuity Act

Dear Readers,

Wish You a Happy May Day-2024

Gratuity is one of the many retirement benefits offered by a company to an employee. It is a lump sum amount that employers pay their employees as a sign of gratitude for the services provided. However, only those employees who have been employed by the company for five years or more are given the gratuity amount. It is governed by the Payment of Gratuity Act, 1972.

All central and state government departments, defense, and local governing bodies are covered under this act. Private organizations can come under its purview subject to fulfilment of certain conditions.

Gratuity Act shall be applicable to

(a)    Every factory, mine, oilfield, plantation, port and railway company.

(b)    Every shop or establishment to which Shops & Establishment Act of a State applies in which 10 or more persons are employed at any time during the year end.

(c)     Any establishment employing 10 or more persons as may be notified by the Central Government.

(d)    Once Act applies, it continues to apply even if employment strength falls below 10.

To receive the gratuity, you must meet the following eligibility criteria:

You should be eligible for superannuation.

You should have retired from service.

You should have resigned after continuous employment of five years with the company.

You on disablement on account of a sickness or an accident.

In case of your death the gratuity is paid to the nominee.


However, the condition of completion of continuous service of five years shall not be necessary in case the termination of the employment of any employee is related to their death or disablement. In this case, ‘completed year of service’ would refer to as continuous service for one year and an employee shall be said to be in continuous service for a period if he/she has been in uninterrupted service, including service which may be interrupted on account of sickness, accident, leave, absence from duty without leave, lay off, strike or a lock-out or cessation of work not due to any fault of the employee.  There is a judgment by the Madras High Court, which states that an employee would be eligible for gratuity even in case he/she has completed 4 years 240 days.

In addition to above, in the case of death or incapacitated, the employer is mandated by law to pay gratuity to the now ex-employer or his nominee/legal heir, as the case may be, irrespective of the number of years of continuous service.

The law further states that in case the nominee of the employee is a minor, then the assistant labour commissioner shall invest the money in nominee’s name in a term deposit with the State Bank of India or a nationalized bank for the minor’s benefit until he/she becomes a major.

Formula for gratuity calculation is G=S*N*15/26

  Gratuity (G)= Last Drawn Salary(S) × No. of Years of Service(N)× 15/26

  The ratio 15/26 represents 15 days out of 26 working days in a month.

  S = Last drawn salary = (Basic Salary + Dearness Allowance).

  N = Years of Service are rounded down to the nearest full year. 

If the number of years you have worked in the last year of employment is more than six months, then it will be rounded to the nearest figure. Suppose your tenure of service is 16 years 7 months, then you receive the gratuity for 17 years. Otherwise, it’s for 16 years if it happens to be 16 years 4 months.

The tax treatment of the gratuity amount depends on the type of employee who has to receive the gratuity.

The amount of gratuity received by any government employee (whether central/state/local authority) is exempt from the income tax.

Any other eligible private employee whose employer is covered under the Payment of Gratuity Act. The maximum amount of gratuity specified is Rs 20 lakh, irrespective of the number of years of service. Please note that in your entire working life, the maximum tax-exempt gratuity amount you may claim, cannot go beyond Rs 20 lakh. Any excesses would be treated as ex-gratia and liable for tax as per the tax bracket.

Gratuity paid to the widow or legal heir of an employee will be exempt of tax – Upon an employee’s demise, the gratuity that is paid to his widow or legal heir will be exempt from tax. Any ex-gratia payment made to an employee or his legal heir on account of an injury caused will also be tax-free.

Forfeiture of gratuity- According to the Payment of Gratuity Act of 1972, when the employee has been terminated due to disorderly conduct wherein, he/she tries to physically harm individuals during his/her employment, an employer holds the right to forfeit their gratuity payment, either wholly or partially despite the employee having completed 5 and more years of service in a company.

Saturday, March 2, 2024

14th Blogiversary

 Dear Readers,

Today I am very happy and proud because this blog has completed its 14 years and today it’s entering into15th year.

I have been working in construction industry continuously for past 36 years. Like others, I struggled to gain the knowledge of this industry in my earlier days.

I have started this blog to pass on the knowledge and benefits gained from my experience to the next generation so that the newcomers do not face such difficulties like me.

I am so proud to express that I've been writing consistently over 14 years, and I am also glad that this blog does not post anything other than engineering.

So happy to know that this blog has reached more than one million page views (10365040) and 158 followers. Many more thanks to the people who made this wonderful moment and I expect you to give the same support in the future too.

This website has been without any ads from the beginning till now. Currently I have linked google AdSense which I made as a trail while I assure you to remove the ad from this blog if it gives any troubles in future.

I have been writing under my pseudonyms Crane and Craneman for so long and since it is the beginning of 15th year, I have decided to write under my original name Arivu & S.Arivazhagan.

Now I want to remember Mr. Chandru, a young man who joined us as a trainee engineer for introducing me to these blogs concept 14 years ago. He also explained me how to start a blog and also express our knowledge and thoughts through the blog. I extend my sincere thanks and gratitude to him at this auspicious moment.

For your kind information, this blog will continue as always with minimum one post per month and maximum 25 posts per year.

Dear readers and friends, I kindly request you to continue your support to my blog.

Once again I thank you all…….

Monday, January 1, 2024

Happy New Year-2024

Dear Readers,

Wish You a Happy New Year

May the New Year bring you happiness, peace, and prosperity. We hope this new year will bring you all the great things you truly deserve. Happy New Year to you and your family!!!

Best Wishes from,

Crane & Craneman

Sunday, June 18, 2023

What items should not be kept in AC room?

Dear Readers,

It is continuation of our previous article" How to use AC in this hot season." Apart from the usage in hot sessions, we should also know what the materials are should not kept inside the AC room, so that we can use the AC in better.

Large metal objects such as iron bureaus, iron beds, iron tables and iron chairs should not be placed in the room. If they are placed in an AC room, they will absorb the cold and cool down first when the air in the room is cooled by the AC operation.

Thus, AC is used for more time than required. Along with running, the AC machine wears out quickly due to wastage of power and long running time of the compressor.

Some offices install false ceilings with thermocol to reduce the height of the room. Due to this the area of ​​the room is reduced. The room will be cool enough if it runs for a short time.

But this is only suitable for offices where doors are opened and closed frequently.

If installed in homes, the room will soon be filled with carbon dioxide emitted by people sleeping in closed rooms! This is not healthy!

AC if the room has iron furniture. The life of the engine will decrease slightly! In a nutshell that AC room should not have more Furnitures.

Monday, May 1, 2023

Employees' State Insurance Act (ESI Act)

 Dear Readers,

Wish You a Happy May Day - 2023

The Employees State Insurance Act, 1948 is beneficial and social legislation. Its main aim is to provide economic security to people who work in certain factories and establishments. 

The ESI scheme provides complete medical care to the employees registered with the ESIC during the period of his/her incapacity and working capacity. It also provides financial assistance to compensate for the loss of wages of the employee during the period of his/her abstention from work due to sickness, maternity and employment injury. The ESI scheme provides medical care to family members of the employee also. The Act contains several important definitions and provisions that regulate these workers.

At present, the ESI scheme is applicable to all factories and other establishments as defined in the Act with 10 or more persons employed in such establishment and the beneficiaries’ monthly wage does not exceed Rupees twenty-one thousand (Rs 21,000) are covered under the scheme. In future this limit may change subject to government policy.  Whether the employer has employed 10 or more employees, all employees employed by the employer, agnostic of the salary are reckoned. The applicability of the scheme is explained through a flow chart below:


Please take a note that Construction Industry does not cover under ESI if it is a green field project. For the similar benefits Construction Industry used to follows BOCW Cess Act. However, it may differ for brown field project hence follow the principle employer guidance.

Establishments that are covered under the ESI Scheme

The Central Government issued a notification that all factories where 10 or more persons are employed are covered under the ESI scheme mandatorily. The following establishments employing 10 or more persons are also mandatorily covered under the ESI scheme:

1). Shops.

2). Hotels or restaurants not having any manufacturing activity, but only engaged in ‘sales’.

3). Cinemas, including preview theatres.

4). Road motor transport establishments.

5). Newspaper establishments.

6). All private educational institutions and medical institutions.

Benefits of the ESI Scheme

Broadly, the benefits under this scheme are categorized under two categories:

Cash benefits (which includes sickness, maternity, disablement (temporary and permanent), funeral expenses, rehabilitation allowance, vocational rehabilitation and medical bonus) and,

Non-cash benefits through medical care.

Complete medical care and attention are provided by the scheme to the employee registered under the ESI Act, 1948 at the time of his incapacity, restoration of his health and working capacity.

During absenteeism from work due to illness, maternity or factories accidents which result in loss of wages complete financial assistance is provided to the employees to compensate for the wage loss.

The scheme provides medical care to family members also.

In case a worker under the Act dies during employment, the ESI Corporation pays some money to his dependents. According to the Act, dependents are certain relatives of a deceased worker. These include his widow, a son below 25 years of age, an unmarried daughter and his widowed mother. A son/daughter above 25 years can also be a dependent if he/she is wholly dependent on the worker.

Pregnancy which leads to the birth of a living child is called “confinement” under this Act. It can also mean the birth of a child (living or dead) after 26 weeks of pregnancy.

The ESI Act contains a few categories of disablements for which employees can claim compensation. These may be either permanent or temporary. Permanent disablements may further be either partial or total.

For More Details about BOCW Cess Click Here
For More Details about Rules and Regulations Click Here 
For More Details about Labour Law's of Construction Industry Click Here
For More Details about Labour Welfare Fund Click Here

Friday, January 1, 2021

Happy New Year 2021

Dear Readers,

Wish You a Happy New Year

May this New Year bring you much joy and fun. May you find peace, love, and success. Sending my heartiest New Year to wish for you!

Best Wishes From,
Crane & Crane Man

Wednesday, January 1, 2020

New Year Wishes - 2020

Dear Readers,

Wish You a Happy New Year
Thousands of candles can be lighted from a single candle, and the life of the candle will not be shortened. Happiness never decreases by being shared.



Your work is going to fill a large part of your life, and the only way to be truly satisfied is to do what you believe is great work. And the only way to do great work is to love what you do. If you haven't found it yet, keep looking. Don't settle. As with all matters of the heart, you'll know when you find it
Best Wishes From
Crane & CraneMan

Tuesday, January 1, 2019

New Year Wishes-2019

Dear Readers,


May each day of the coming year be vibrant and cheerful. May each day bring along many reasons for smiles and celebrations.
Happy New Year!
Dear Readers

Click here to get more
If you think in terms of a year, plant a seed; if in terms of ten years, plant trees; if in terms of 100 years, teach the people. Happy New Year 2019.
Crane & Craneman
Provided by MasterGreetings.com

Saturday, September 15, 2018

Engineer Day - 2018

Dear Readers,
Engineer Diary convey the best wishes to you and your friends "Wish you a Happy Engineers Day". 
It may very odd to share a article which may demoralise the engineers, However it is very true and essential to understand the reality. It is very worth to share this article " Why are engineers in India paid a low salary?" by Mr. Alok Kumar. He is answered by Alok Kumar in Quora Forum. He works at Ministry of Home Affairs, India. Take some time to read. It is worth.
*************
Because they are oversupplied.
We have 2 lakhs CAs, 10 lakhs doctors. Engineers! They are in crore.
Take the case of doctors. US has 25 lakh doctors for just about 32 crore population. India has 10 lakh doctors for 130 crore population. Obviously, doctors are scarce in India. They get better salaries.
Compare this with engineers. US produces around 1 lakh engineers per year for a $ 16 Trillion economy. India produces 15 lakhs engineers for a $ 2 Trillion economy.
If there are so many engineers, there must be enough demand to pull them in. But it is not there. The earlier mass recruiting sector was manufacturing. It used to recruit from the core branches like civil, electrical and mechanical. But, manufacturing is stagnant at just 17% of the GDP. So the core branch placements have become difficult.
The new mass recruiter is the IT sector. It grew from scratch to almost 5% of the GDP in 25 years. Employed millions of engineers.
Now, IT is also saturating.
If you look at the sectoral composition of Indian economy, most of the sector do not need engineers. Tourism is 10% of the GDP, does not require engineers. Financial sector, trade, hotels and restaurants do not require engineers. Requirement in health, education, agriculture is almost negligible.
More than 50% of the GDP has no role for engineers. Still most of us are becoming engineers. The current situation is not sustainable.
So the demand is less while the supply is high. Over and above this, skill level of an average engineer is poor. I say its non-existent. Leave the top 100–200 colleges. And you will find that a fresh engineer has no idea of what s/he has studies. Ask a fresh mechanical engineer, can s/he design a simple frame?
Today the situation is that most engineers are working in a field that has no connection to what they have studied in the college. This is a waste of resources.
Engineering degree does not come cheap. It costs about 10 lakhs. For poor parents, its a huge burden. When their son is not able to secure a job, they are devastated.
For the nation, you can calculate the loss. Leave around 1 lakh engineers that NASSCOM says are employable. The rest 14 lakhs have each wasted 10 lakhs of fees. That totals to around $ 20 Billion. Almost equal to the Government’s spending on healthcare. Over this, there is loss of human capital.
We need to replan the whole engineering education system. Cut down on the number of colleges and improve the quality in the rest.

Sunday, April 22, 2018

Save Water

We should start saving the water we have and use the water we have, economically. Here are a few ideas on how to conserve water..
1. Almost all of us have reverse osmosis (RO) system installed at home for water for drinking and cooking. I am sure everyone know that it let's out almost one litre water to produce one litre drinking water. So keep a bucket to the outlet and store this water. This can very well be used for cleaning the floor, for toilet etc. What they normally say is, the bacteria which is there in this water will die in half an hour time when get exposed to normal air.
2. Similarly a bucket can be placed in the AC outlet. Everyday morning this water can be used for the plants in your flat, to clean your cars or even be drained into the rainwater harvesting system so that the ground water can get charged. In fact these outlets can be connected on a regular basis to get drained there.
3. Stop using running water for cleaning utensils and use water from bucket. By this practice lot of water can be saved.
4. Similarly use shower for bathing. This also would reduces water consumption.
5. Use your washing machine when you have a full load because washing machines are designed in such a way that it uses almost the same amount of water for washing low load to very high load.
6. If your washing machine's outlet is not connected to the closed drain. That is if the machine's outlet is let out in the bathroom, then the soap water which comes out of the machine can very well be used to soak your utensils which you have used for cooking.
7. Some of us face a problem with dust in the water. For example the bore well water may turn slightly muddy when the water bed goes down or because of the accumulated dirt in the overhead tant, the water may come with dust. Please don't waste this watter. Keep a block of Alam (padigaram in tamil) in the bathroom. Just dip this in the bucket that has the muddy water and allow it to dissolve by rotating your hand. A few rotations will do. After about 10-15 minutes you will see the dust and muddy substances settled in the bottom and crystal clear water in the top ! This Alam would be available in all Naatu marundhu shops.
These are some of the ideas.
If you come across any good ideas to save water please do share. Little drops of water make the mighty ocean.
Water saved is water produced.

Friday, March 2, 2018

Eighth Blogoversary

Dear Readers,

We are glad to inform you that this is an Eighth Blogoversary for Engineer Diary. We would like to take this opportunity to thank each and every one of you who has stayed with us along our incredible journey for the past eight years.Once again we repeat that it has been our dream to share the technical knowledge and data’s with others, especially for engineers, technicians and others who are involved and fresh in construction industry.
We know that we are moving too slow regarding the quantity of posts (Total 160 posts blogged in past eight years and 15 posts during last year) This is due to more consciousness about the technical data. We realised how important it has become to us as well as to you, and we promise you that we will keep it up with quality information.
Dear Readers,

Click here to get more
Happy 8th Blogoversary for Engineer Diary
Crane & Crane Man
Provided by MasterGreetings.com

From this year on wards, we would like to move the diversity from core technical and will share additional knowledge like Labour law, ESI, HR, and Finance. Hope this year we will increase our posts.
We are very grateful to everyone who has supported this blog with love, wonderful comments, likes and introducing this blog to other people, etc. Once again, we convey our thanks to our readers who have offered support here along the way.

Monday, January 1, 2018

New Year Wishes - 2018

Dear Readers,

A fresh new year is once again upon us. It’s the time to be thankful for the blessings of the past year and to take stock of all our achievements. At the same time, New Year 2018 is a brand new year to start afresh, to start strong, and yet another chance to do everything we want to do this year.

Dear Readers,

Click here to get more
Happy New Year! May the New Year bring to you warmth of love, and a light to guide your path towards a positive destination.
Crane (Engineer Diary)
Provided by MasterGreetings.com

Friday, September 15, 2017

Engineer Day - 2017

Dear Readers,
Engineer Diary bringing to you a very Happy and Memorable Engineer Day Wishes.

Dear Readers,

Click here to get more
Engineer Diary Wishes \\\" Wish You a Happy Engineer Day\\\"
Crane & Craneman
Provided by MasterGreetings.com

“Success in any profession or trade is due largely to the capacity individuality, integrity, Foresight, hard work of the person who undertakes it and it depends on man’s own exertions.”

Monday, May 1, 2017

BOCW Cess

Dear Readers,
 
Wish You a Happy May Day-2017

Following three industries where normally unskilled manpower are being deployed
·         Construction Industries –Applicable act is BOCW Act, 1996
·         Manufacturing Industries – Applicable act is Factories Act
·         Mining Industries – Applicable act is Mines Act
Now, let us discuss about BOCW act. It is short form of Building and Other Construction Workers' Welfare Cess Act, 1996

Normally in construction Industries, we used to follow the Contract Labour Act, 1971, and we take Labour License before commencement of Construction Job. In that Act, normally the details are given about the Contract Workforce, Obtaining Labour License Procedure, Welfare Measures, and all about the contract Workmen. The Government felt that the act is not having the uniqueness.
 
Hence in 1996, Indian government introduced the Building & Other Construction Workers Act, (in Short, BOCW Act), BOCW Rules and BOCW Welfare Cess Act, In BOCW Act & Rules it has given the direction about the Welfare measures to Workmen, Safety Precautions and many Technical Aspects about the Tools, Tackles, Instruments, Machineries, Lifting Appliances, its maintenance, inspection, etc. Medical Facilities required to be given to the injured workmen, Periodical Medical Checkup for drivers, operators, food handlers, etc., Pre-employment Medical Checkup for every workmen.
In this Act, for implementation purpose the Government needs fund. So they implemented the BOCW Welfare Act, which made the provision to collect 1% minimum and Maximum of 2% of the Cost of Construction / Works carried out during the Financial Year to be paid as BOCWW Cess to the BOCWW Cess Board.
Some of the Key Points are below.
·         Cess came into force on 26th March, 1998

·         This act is applicable immediately on commencement of Job

·         The Principal Employer and the contractors, both are liable for this Cess

·         The responsibility of Principal Employer to make the payment of Cess.

·         The BOCW Cess is payable to the Government (BOCW Welfare Commissioner of State)

·         Cess rate not exceeding two percentage, but not less than one percentage of the cost of construction incurred by an employer.

·         Cess shall not include the Cost of land and any compensation paid or payable to a worker or his kin under the Workmen's Compensation Act. 1923.

·         BOCW act does not include any building or other construction work to which the provisions of the Factories Act, 1948 (63 of 1948), or the Mines Act, 1952 (35 of 1952), apply.

·         Cess is not refundable in any case. However, the amount of compensation paid to the workers during that year, can be deducted from the Cess payable.

·         Cess shall be paid by an employer,

o   If the project duration is less than a year, within thirty days of completion of the construction project or within thirty days of the date on which assessment of Cess payable is finalised, whichever is earlier, to the Cess collector.

o   If the duration of the project or construction work exceeds one year, Cess shall be paid within thirty days of completion of one year from the date of commencement of work and every year thereafter at the notified rates on the cost of construction incurred during the relevant period.

·         Once Factories Act is implemented there the BOCW act will get ceased.

·         Once the Factory fencing is made excluding the expansion project then Factories Act is not applicable and only BOCW will be applicable to that expansion project.

·         If Construction area falls within the factory premises then BOCW Act cannot be applicable and only Factories Act will be applicable.

·         For Registration under BOCW Act is exempted for those who got covered by Factories Act and Mines Act and the construction work carried out for self and the cost is within 10 Lakhs.

·         Generally ESI Coverage is not applicable for Construction Industries and not for BOCW Act. But if your construction Activities are being done in the premises of Factories or your principal employer is covered under ESI, then obviously you also required to make payment of ESI as 1.75% Employee Share and 4.75% Employer Share.
The above views are my personal views from the study which I have made on this subject. There is a need to take up the ambiguities in this entire enactment

Thursday, March 2, 2017

Seventh Blogoversary

Dear Readers,

I am very glad to inform you that Engineer diary blog has been passed another year. yes, it is a Seventh blogoversary. I would like to take this opportunity to thank each and every one of you who has stayed with us along our incredible journey for the past Seven years.
 
It was my long dream that share the technical knowledge and data’s to others, especially for engineers, technicians and others who are being involved in construction industry. Accordingly, Seven years ago, I wrote my first blog post, having no idea where it would lead me or how it would change my life, but I was very sure that demand for technical data will be always exists and I believed that I can do better some extent. Hope new comers in construction industry benefited through this blog. Hope I am moving in right direction without change my core value (This blog is not for time pass)
 
Dear Readers,

Click here to get more
Seventh Blogoversary for Engineer Diary
Crane & Crane Man
Provided by MasterGreetings.com

 
I know that I am moving little bit slow regarding the quantity of posts (Total 144 posts blogged during these period and 20 posts during last year) This is due to more conscious about the technical data, we realize how important it has become to us as well as to you, and we promise we will keep it up with quality information.
 
I have received so many loving emails and comments through the years because of this blog, which makes my heart beyond happy. I have made so many amazing friends through the years because of this blog. I love that so much. I am so grateful to everyone who has supported this blog with love, behind the scene advices, wonderful comments and likes, introducing the blog to people, etc. I really do appreciate.
 

Once again, thanking you to each of you who have offered support here along the way.
 
-Crane  & Crane Man.
Related Posts Plugin for WordPress, Blogger...

Labels

Abbreviations (38) ABW (1) AC (2) Acre (2) acronyms (12) Admixture (3) Alloy Steel (1) Analysis (3) ANSI (1) Anti friction bearing (2) Apothecaries Mass (1) Arc welding (2) Avoirdupois Mass (1) AWG (4) AWS (4) BCR 295 (2) Beam (22) Bearings (5) Benefits (2) Blasting & Painting (8) Blogoversary (5) Bolt (8) CAR A/C (1) Cartoon (2) Cement (1) Cent (2) CHANNEL (8) Chequered Plate (1) Chinese (4) Civil (7) Classification (3) Cleaning (4) Cold Rolled Steel (2) Colour Code (1) Column Section (1) Composite Materials (3) Computer (1) Concrete (4) Construction Industry (23) Conversion Table (4) Cooking (1) Costing (3) Crane Rail (2) Cylinders (1) Density (1) DFT (2) Domestic (5) Drill bit (1) Drill gauge (1) Drilling (1) Dry Ice (1) EHS (1) Electrical (1) Electrode (1) Ellipcon Steel (1) Elliptical Hollow Section (1) EN 10083-3 (1) EN 10219 (1) Engineer Day (7) Engineering Miracle (2) Environment (1) Equipment (2) ESI (1) Estimation (2) European Steel (3) Factory Act (1) fasteners (3) Fibre Rope (4) Fire (1) FLAT (3) floating crane (1) Flood (1) Foil (1) Formula (1) FRP (3) GAUGE (9) General (35) Greetings (9) GST (1) H-beam (4) Handrail (1) Heavy Weight Beam (1) HeliArc (1) Helmet (2) HEXAGOAN (2) Hollow Rectangle (3) Hollow Square (5) Hollow Steel (10) Hot rolled Steel (30) HR & IR (2) HSFG (2) HSS (9) HT (1) HT BOLT (1) I-Beam (4) Information (10) Informations (5) Introduce (4) IP (1) IPE (3) IS 1173 (5) IS 1363 (2) IS 1786 (1) IS 3443 (2) IS 4923 (2) IS 808 (15) IS:1732 (1) ISA (2) ISCR (1) ISHB (3) ISJB (4) ISJC (2) ISLB (3) ISLC (2) ISMB (4) ISMC (2) ISMCP (1) ISNT (2) ISSC (2) ISWB (3) JIS G3466 (1) Joints (2) Junior Beam (2) Junior Channel (3) Labour Law (7) Labour Welfare (4) Lamination (2) Land Measurement (2) Light Beam (2) Light Channel (3) LPG Cylinder (1) Man Day (2) Man Hour (1) Man Month (1) Management (1) Mass (3) Measurement (3) mechanical (1) Metals (7) Mile Stone (2) Music Wire (4) MWG (6) Non-Metal (3) Numbers (3) OCTOGAN (1) Oil (1) Painting (6) PAN (1) Parallel Flange Channel (2) PFC (2) PIPE (5) Piping (4) Planning (8) Plastics (2) Plates (1) Pole (1) PPE (1) Precautions (4) Protection (1) Rain (1) Rebar (1) Reconciliation (2) Reinforcement Rod (1) Reinforcemnt Steel (1) Reo (1) Rigging (9) River on River (1) Rope (7) ROUND (2) RSJ (1) Safety (14) Scale (1) Self Explanatory (5) SEP (5) Serrated Flat (1) Sheet (3) Short cut key (1) Sling (1) Slit Tee (1) Specific Gravity (4) Spoon (1) SQUARE (2) SSPC (1) Steel (21) Steel Beam (7) Steel Section (6) Steel Section Type (5) Stick welding (1) Structural Steel (58) Surface Preparation (8) SWG (5) SWL (1) Technical (10) Tee Section (5) Thanks (7) TIG (1) TIG Welding (1) Tips (2) Tools & Tackles (2) Torque (6) Troy Mass (1) TUBE (2) Turnbuckle (1) UB (2) UC (2) Unit of Mass (1) UNIT WEIGHT (58) Universal Beam (1) universal Column (2) Useful Tips (3) Valve (1) Water (4) Weather (3) Weight (14) Welding (16) Wide Flange Beam (2) Wind (7) Wind Speed (4) Wire Rope (3) Wishes (20) WWD (1)

Contact Form

Name

Email *

Message *

Note

1) I have extracted the information from reference sources which may not be in accordance with the latest Standards - as identified.

2) The data’s are based on a review of various reference sources. For important work please check against quality information sources.

3) The Articles are no way connected to company of author belongs.

4) This Blog will not be liable for any, direct or indirect, consequential or incidental damages or loss arising out of the use of this information.

5) If you have any suggestions or feedback on how this blog can improve it for you, please feel free to e-mail me (engineerdiary@gmail.com) Self will try my best to keep up with it!

6) Paypal account of this site is engineerdiary@gmail.com

7) If your brand/company is keen to work with Engineer Diary for advertisement and sponsorship, you can drop us an email at engineerdiary@gmail.com

8) For More Disclaimer please refer Disclaimer Page